isee
Posted Dec 15, 2023 | Hits: 20 | Stock No: #81667
Website:http://www.huanya-refractory.com
image001
Product Name
JIANAI Aluminate Cement
Product Model
CA50-A600
Classification
High Alumina Cement
Specifications
50kg
Alumina Content
50%
Production Process
Rotary Kiln
image003
Degree of Fineness
Burnett's Specific Surface Area
≥300㎡/kg
Setting Time
Initial Setting Time
≥30min
Final Setting Time
≤6h
Flexural Strength Consummation
1 Day
≥6MPa
3 Days
≥7MPa
Strong Pressure Execute
1 Day
≥45MPa
3 Days
≥55MPa
image011
Introduction:
Jianai? CA50-A600 is a aluminate cement under the brand of Jianai?. As a hydraulic binder, its alumina content is about 50 %.
Because CA phase is the main mineral phase of CA50-A600 aluminate cement, CA50-A600 aluminate cement not only has reasonable and stable hydration properties,but also has rapid strength development and excellent mechanical strength.
Jianai? CA50-A600 refractory cementstrictly follows GB 201-2000 standard.Its chemical composition and physical properties meet or even exceed national standards.
By optimizing the production process, CA50-A600 refractory cement is not only suitable for a variety of amorphous refractory construction methods (such as casting, spraying), and meet a variety of gating formula systems (e.g., traditional cement combined pouring (CC), medium cement combined pouring (MCC) and low cement combined castable (LCC) requirements for construction performance.
Jianai? CA50-A600 refractory cement does not contain any additives to ensure its adaptability and stability in terminal products.
● Chemical composition: according to GB/T 205-2008 (except total sulfur and chlorine);
● Specific surface area: GB/T 8074;
● fineness: according to GB/T 1345, use a sieve with a hole size of 0.045mm;
● Setting time: according to Appendix A in GB 201-2000;
● Strength: according to the modified provisions in GB/T 17671 and GB 201-2000.
image009
Reference Information:
The following information is for reference only:
● Main mineral phase: CA*
● Secondary mineral phases: C12A7, C2AS, CT*
* C=CaO, A=Al2O3, S=SiO2, T=TiO2
image013
Package:
1. This series of products adopt cement packing bags in accordance with GB9774 loading,each bag weighs 50 kg;
2. 2 ton on pallet with plastic film;
3. Other packing forms and single weight may be determined by the parties through negotiation.
Transportion & Storage:
In the process of transportation and storage of aluminate cement, special attention should be paid to moistureproof, so as not to affect the product performance;
Aluminate cement in the process of transportation, storage and use, to avoid other types of cement (such as Portland cement, etc.) and harmful impurities (such as Lime, etc.) contact;
As a hydraulic binder, the Jianai? CA50-A600 furnace cement must be stored in a dry environment and removed from contact with the ground. A lot of customer experience has shown that in good storage conditions, the Jianai? CA50-A600 furnace cement can ensure its performance does not degrade for at least 3 months;
In the process of using aluminate cement, the mixing water should be pure, so as to avoid the possible harmful impurities affecting the product performance.
image007